Un-bricking, updating and/or fixing software faults on your Samsung Galaxy Tab 4 10.1 (WIFI) (SM-T530) can conveniently be done utilizing this main firmware.
This is a 4 data (AP, BL, CP as well as CSC) repair firmware with which you can unbrick your smart device and/or repair various other software mistakes on the device.
This firmware fixes software concerns like:–LRB-
- Un-brick bricked tools
- Fix apps force closing
- Device obtaining stuck during usage, or lagging
- Fix stuck on boot logo design
- Fix boot loop
- Remove custom-made recuperation (e.g, TWRP)
- Remove root as well as restore default system data
- Help upgrade/ update Android version to most recent safety patch
- And just any software related mistakes
Before downloading and install any firmware for your Samsung device, check and also validate that the firmware is suggested for your specific gadget model. This is essential to avoid downloading and install the incorrect data, creating your tool to brick.
Firmware information/ Download
| Model | SM-T530 |
| T530 XXU1AOA1_DBT1AOA1_v4.4.2 | Download |
How to flash Samsung Galaxy Tab 4 10.1 (WIFI) (SM-T530) via Odin
Note: Backup all important information (messages, calls, application information, setups, etc) as these might be erased as soon as flashing is successful.
Charge your phone to a minimum of 50% prior to you proceed with the flashing guidelines listed below. Read and also comply with all actions carefully, particularly if you are not really knowledgeable in blinking Samsung gadgets.
- Download and mount Samsung official USB driver on your computer system. ( Skip action if currently installed)
- Download as well as extract (unzip) the firmware data
- Download Odin Tool
- Extract the contents of Odin ZIP data
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press and also hold Home Power Volume Down buttons)
- Connect tool to Computer using USB cable and wait until you obtain a blue check in Odin
- Select/ include the four firmware files extracted in step one.
- For circumstances, BL is the bootloader file- click BL in Odin and also choose that documents. In the same way, click AP, CP, and also CSC select the files appropriately. See listed below screenshot
- Make sure re-partition is NOT ticked
- Click the beginning switch and also wait few minutes for the blinking process to begin and complete
- Once blinking is total, detach device as well as boot typically.