Un-bricking, updating and/or repairing software faults on your Samsung Galaxy Tab Pro 10.1 (SM-T520) can quickly be done using this official firmware.
This is a 4 documents (AP, BL, CP and also CSC) fixing firmware with which you can unbrick your smartphone and/or solution various other software faults on the device.
This firmware repairs software concerns like:–LRB-
- Un-brick bricked devices
- Fix applications require closing
- Device obtaining stuck throughout usage, or lagging
- Fix stuck on boot logo design
- Fix boot loophole
- Remove customized recuperation (e.g, TWRP)
- Remove origin and also bring back default system files
- Help upgrade/ upgrade Android variation to most current security spot
- And simply any type of software relevant mistakes
Before downloading and install any firmware for your Samsung device, check as well as confirm that the firmware is indicated for your exact gadget version. This is required to prevent downloading and install the wrong documents, creating your tool to brick.
Firmware information/ Download
| Model | SM-T520 |
| T520 ZCUANB4_CHNANB4_v4.4.2 | Download |
How to blink Samsung Galaxy Tab Pro 10.1 (SM-T520) through Odin
Note: Backup very important data (messages, contacts, application data, settings, etc) as these could be gotten rid of as soon as blinking succeeds.
Charge your phone to at the very least 50% before you wage the blinking instructions below. Read and adhere to all actions meticulously, particularly if you are not very knowledgeable in blinking Samsung tools.
- Download as well as install Samsung official USB driver on your computer system. ( Skip action if already mounted)
- Download and essence (unzip) the firmware file
- Download Odin Tool
- Extract the materials of Odin ZIP data
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press as well as hold Home Power Volume Down switches)
- Connect tool to Computer via USB cord and also wait until you get a blue check in Odin
- Select/ include the four firmware files drawn out in step one.
- For instance, BL is the bootloader data- click BL in Odin and also select that data. Similarly, click AP, CP, as well as CSC select the documents as necessary. See below screenshot
- Make sure re-partition is NOT ticked
- Click the begin switch and also wait few minutes for the flashing procedure to begin and also complete
- Once flashing is total, detach tool as well as boot normally.