Samsung Galaxy Core Prime LTE/VE Firmware (Unbrick/Repair)

Un-bricking, updating and/or repairing software mistakes on your Samsung Galaxy Core Prime LTE/VE can quickly be done utilizing this main firmware.

This is a 4 data (AP, BL, CP and CSC) repair service firmware with which you can unbrick your smart device and/or repair other software faults on the tool.

This firmware repairs software issues like:–LRB-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device obtaining stuck during usage, or lagging
  • Fix stuck on boot logo design
  • Fix boot loop
  • Remove custom-made recovery (e.g, TWRP)
  • Remove root as well as recover default system files
  • Help upgrade/ update Android version to most recent security patch
  • And just any kind of software relevant mistakes

Before downloading any kind of firmware for your Samsung gadget, check and verify that the firmware is suggested for your specific device design. This is essential to avoid downloading and install the incorrect data, triggering your gadget to block.

Firmware details/ Download

Model SM-G361 F
G361 FXXU1AOH3_OXX1AOH2_v5.1.1 Download

Model SM-G361 H
G361 HXXU0AOG9_ODD0AOG9_India_v5.1.1 Download

How to flash Samsung Galaxy Core Prime LTE/VE through Odin

Note: Backup very important data (messages, get in touches with, application information, settings, etc) as these may be eliminated as soon as flashing succeeds.

Charge your phone to at the very least 50% before you wage the flashing instructions below. Read and comply with all actions carefully, particularly if you are not very seasoned in blinking Samsung tools.

  • Download and also set up Samsung main USB driver on your computer system. ( Skip action if already mounted)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP data
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and also hold Home Power Volume Down switches)
  • Connect device to Computer by means of USB wire as well as wait till you obtain a blue check in Odin
  • Select/ add the four firmware documents drawn out in step one.
    • For instance, BL is the bootloader documents- click BL in Odin as well as pick that data. In the same way, click AP, CP, and also CSC pick the files accordingly. See below screenshot
Samsung Galaxy Core Prime LTE/VE Firmware (Unbrick/Repair) 1
  • Make certain re-partition is NOT ticked
  • Click the beginning switch and wait few minutes for the blinking procedure to start as well as complete
  • Once flashing is complete, detach device and also boot typically.

Add Comment