Un-bricking, upgrading and/or fixing software mistakes on your Samsung Galaxy Trend 2 (SM-G313 HN) can easily be done utilizing this main firmware.
This is a 4 data (AP, BL, CP and CSC) repair service firmware with which you can unbrick your smartphone and/or repair other software mistakes on the device.
This firmware repairs software problems like:–LRB-
- Un-brick bricked tools
- Fix applications force closing
- Device getting stuck throughout use, or lagging
- Fix stuck on boot logo design
- Fix boot loophole
- Remove custom-made healing (e.g, TWRP)
- Remove origin as well as bring back default system documents
- Help upgrade/ update Android variation to most current safety spot
- And just any kind of software associated mistakes
Before downloading any type of firmware for your Samsung device, check and verify that the firmware is meant for your precise gadget model. This is required to avoid downloading the wrong file, triggering your tool to block.
Firmware information/ Download
| Model | SM-G313 HN |
| G313 HNXXU0ANG2_DBT0ANG1_v4.4.2 | Download |
How to flash Samsung Galaxy Trend 2 (SM-G313 HN) via Odin
Note: Backup all important data (messages, get in touches with, application data, setups, etc) as these may be gotten rid of when blinking succeeds.
Charge your phone to at least 50% prior to you wage the blinking directions listed below. Read as well as comply with all actions very carefully, especially if you are not extremely seasoned in flashing Samsung devices.
- Download and install Samsung main USB driver on your computer system. ( Skip step if currently mounted)
- Download and also extract (unzip) the firmware file
- Download Odin Tool
- Extract the contents of Odin ZIP documents
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press and also hold Home Power Volume Down switches)
- Connect gadget to Computer by means of USB cable and also wait until you obtain a blue sign in Odin
- Select/ include the 4 firmware files extracted in step one.
- For circumstances, BL is the bootloader documents- click BL in Odin and pick that file. In the same way, click AP, CP, and also CSC pick the files accordingly. See below screenshot
- Make certain re-partition is NOT ticked
- Click the beginning button and wait couple of mins for the flashing process to begin and complete
- Once blinking is full, detach device and boot usually.