Un-bricking, upgrading and/or fixing software mistakes on your Samsung Galaxy S Duos 2 (GT-S7582) can conveniently be done using this main firmware.
This is a 4 data (AP, BL, CP and also CSC) repair firmware with which you can unbrick your smart device and/or fix various other software faults on the tool.
This firmware repairs software concerns like:–LRB-
- Un-brick bricked gadgets
- Fix applications require closing
- Device obtaining stuck during usage, or lagging
- Fix stuck on boot logo design
- Fix boot loophole
- Remove customized healing (e.g, TWRP)
- Remove root as well as restore default system files
- Help upgrade/ update Android version to most current safety and security spot
- And simply any type of software relevant mistakes
Before downloading any type of firmware for your Samsung gadget, check as well as validate that the firmware is suggested for your exact gadget model. This is needed to prevent downloading and install the incorrect file, causing your gadget to brick.
Firmware information/ Download
| Model | GT-S7582 |
| S7582 XXUANG1_OJVANI1_Arabic_v4.2.2 | Download |
| Model | GT-S7582 L |
| S7582 LUBUAOA1_UUBAOA1_v4.2.2 | Download |
How to blink Samsung Galaxy S Duos 2 (GT-S7582) by means of Odin
Note: Backup very important information (messages, contacts, application data, setups, etc) as these might be removed when flashing achieves success.
Charge your phone to a minimum of 50% prior to you proceed with the blinking guidelines listed below. Read as well as comply with all actions thoroughly, specifically if you are not really knowledgeable in flashing Samsung tools.
- Download and mount Samsung main USB driver on your computer system. ( Skip action if already mounted)
- Download as well as remove (unzip) the firmware documents
- Download Odin Tool
- Extract the contents of Odin ZIP data
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press as well as hold Home Power Volume Down switches)
- Connect gadget to Computer via USB wire as well as wait until you get a blue sign in Odin
- Select/ add the 4 firmware files extracted in step one.
- For circumstances, BL is the bootloader data- click BL in Odin and also select that documents. In the same way, click AP, CP, and also CSC pick the files as necessary. See listed below screenshot
- Make sure re-partition is NOT ticked
- Click the begin button as well as wait couple of minutes for the blinking process to begin and complete
- Once flashing is complete, disconnect gadget as well as boot typically.