Huawei Y3 II official stock firmware (FullOTA + Flashtool)

Download Huawei Y3 II official stock firmware update from the links in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Huawei Y3 II Flashtool Firmware

The flashtool firmware files below should be flash via SP Flashtool. Be sure to check that you are flashing firmware for your exact device build number, to avoid bricking the phone.

Build/ Region Firmware link File size Other info.
LUA-U22C326B104 Download 846 MB
LUA-U22C326B102 Download 846 MB
LUA-U22C479B006 Download 1 GB Use DA luna.bin
LUA-U22C479B004 Download 1.2 GB Use DA_LUNA_KEY.bin as DA file
LUA-U22C567B010 Download 1 GB Bootloader MUST be unlocked first
LUA-L01_ALPS.L1.MP3.V2.95_OT6735M.35GU.L1_P63 Download 966 MB

Full OTA stock recovery firmware

Huawei Y3 II (LUA-L22) firmware

Build number Region Firmware link File size
LUA-L22_C567B101 Sri Lanka Download 913 MB

Huawei Y3 II (LUA-U22) firmware

Build number Region Firmware link File size
C567B010 Nepal, Southern-East Asia Download 966 MB
C328B005 Western Africa, Eastern and Southern Africa, Middle East, Northern Africa Download 941 MB
C567B010 Sri Lanka Download 996 MB
C328B013 Middle East & Africa Download 0.99 GB

How to flash Huawei firmware

In order to install this firmware on your device, you need:

  • SD card
  • Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and or only
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the file – create the dload folder and copy the file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.

Add Comment