Download Huawei Ascend G630 official stock firmware update from the links in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.
If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.
Huawei Ascend G630 (G630-U00) firmware
Build number | Firmware link | File size |
---|---|---|
V100R001C17B122 | Download | 685 MB |
Huawei Ascend G630 (G630-U10) flashtool firmware
Build number | Region | Firmware link | File size |
---|---|---|---|
G630-U10 V100R001C00B127CUSTC10D001 | Non-specific (Russian, Uzbekistan | Download | 763 MB |
G630-U10_V100R001C00B159CUSTC433D001 | Non-specific (Middle East | Download | 689 MB |
V100R001C00B159CUSTC470D001 | Philippines | Download | 679 MB |
V100R001C00B125CUSTC433D001 | Nigeria | Download | 602 MB |
V100R001C00B160CUSTC10D001 | Russia | Download | 758 MB |
Huawei Ascend G630 (G630-U20) flashtool firmware
Build number | Region | Firmware link | File size |
---|---|---|---|
V100R001C00B127CUSTC432D001 | Poland | Download | 687 MB |
G630-U20V100R001C00B126CUSTC21D002 | Spain | Download | 806 MB |
V100R001C00B159CUSTC432D001 | Belgium | Download | 693 MB |
V100R001C00B159CUSTC432D001 | Hungary | Download | 618 MB |
V100R001C00B127CUSTC432D001 | Croatia | Download | 680 MB |
Huawei Ascend G630 (G630-U251) flashtool firmware
Build number | Region | Firmware link | File size |
---|---|---|---|
V100R001C00B116CUSTC40D116 | Chile | Download | 748 MB |
V100R001CUSTC605D001 | Venezuela | Download | 694 MB |
V100R001C00B159CUSTC605D001 | Panama | Download | 706 MB |
V100R001C00B157CUSTC470D001 | Philippines | Download | 689 MB |
V100R001C00B120 | Latin America, Guatemala | Download | 623 MB |
V100R001C00B159CUSTC605D001 | Nonspecific (Northern Latin America | Download | 637 MB |
How to flash Huawei firmware
In order to install this firmware on your device, you need:
- SD card
- Archive with firmware, downloaded from any link above (may contain dload folder with files- unlmt.cfg and update.zip or only update.zip)
- Fully charged battery
So, in order to flash the firmware you need to perform the following steps:
- Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the update.zip file – create the dload folder and copy the update.zip file and an empty file with the name unlmt.cfg into it);
- Reboot tablet;
- After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
- As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.