Un-bricking, updating and/or repairing software mistakes on your Samsung Galaxy S2 Duos (GT-S7273 T) can quickly be done utilizing this official firmware.
This is a 4 file (AP, BL, CP and also CSC) repair service firmware with which you can unbrick your smartphone and/or repair other software faults on the device.
This firmware fixes software issues like:–LRB-
- Un-brick bricked tools
- Fix applications require closing
- Device getting stuck during usage, or lagging
- Fix stuck on boot logo
- Fix boot loophole
- Remove customized healing (e.g, TWRP)
- Remove origin and also restore default system documents
- Help upgrade/ upgrade Android version to newest safety and security patch
- And simply any type of software relevant faults
Before downloading any firmware for your Samsung tool, check and also verify that the firmware is implied for your specific device model. This is required to avoid downloading and install the wrong documents, triggering your tool to block.
Firmware details/ Download
| Model | GT-S7273 T |
| S7273 TUBUANG1_UUBANG1_v4.2.2 | Download |
How to blink Samsung Galaxy S2 Duos (GT-S7273 T) using Odin
Note: Backup all important information (messages, get in touches with, application information, settings, etc) as these may be gotten rid of once flashing achieves success.
Charge your phone to at least 50% prior to you wage the flashing directions listed below. Read and follow all steps very carefully, specifically if you are not really seasoned in flashing Samsung tools.
- Download and mount Samsung main USB driver on your computer system. ( Skip action if currently mounted)
- Download as well as remove (unzip) the firmware file
- Download Odin Tool
- Extract the contents of Odin ZIP file
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press as well as hold Home Power Volume Down buttons)
- Connect gadget to Computer through USB cable and wait till you get a blue check in Odin
- Select/ add the four firmware documents drawn out symphonious one.
- For circumstances, BL is the bootloader documents- click BL in Odin as well as select that data. In the same way, click AP, CP, as well as CSC pick the documents as necessary. See listed below screenshot
- Make certain re-partition is NOT ticked
- Click the begin button and also wait couple of minutes for the flashing process to begin and finish
- Once blinking is full, disconnect device and boot generally.