Samsung Galaxy Pocket Neo (GT-S5310) Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or fixing software mistakes on your Samsung Galaxy Pocket Neo (GT-S5310) can conveniently be done utilizing this main firmware.

This is a four documents (AP, BL, CP as well as CSC) fixing firmware with which you can unbrick your mobile phone and/or solution other software faults on the gadget.

This firmware repairs software concerns like:–LRB-

  • Un-brick bricked devices
  • Fix applications compel closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loophole
  • Remove customized recovery (e.g, TWRP)
  • Remove root as well as recover default system documents
  • Help upgrade/ update Android version to most recent protection spot
  • And simply any kind of software related mistakes

Before downloading and install any kind of firmware for your Samsung device, check and also verify that the firmware is suggested for your specific gadget version. This is required to prevent downloading the incorrect file, causing your gadget to block.

Firmware information/ Download

Model GT-S5310
S5310 XXAME2_OXXAME1_v4.1.2 Download

How to blink Samsung Galaxy Pocket Neo (GT-S5310) through Odin

Note: Backup very important data (messages, contacts, app information, setups, etc) as these may be removed as soon as blinking is successful.

Charge your phone to a minimum of 50% before you wage the flashing guidelines below. Read and also follow all actions meticulously, specifically if you are not very seasoned in blinking Samsung tools.

  • Download and also set up Samsung main USB driver on your computer. ( Skip action if already mounted)
  • Download and also essence (unzip) the firmware data
  • Download Odin Tool
  • Extract the contents of Odin ZIP documents
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and also hold Home Power Volume Down buttons)
  • Connect gadget to Computer through USB wire as well as wait up until you get a blue check in Odin
  • Select/ include the 4 firmware documents extracted in step one.
    • For instance, BL is the bootloader data- click BL in Odin and also select that documents. In the same way, click AP, CP, and CSC choose the files accordingly. See listed below screenshot
Samsung Galaxy Pocket Neo (GT-S5310) Firmware (Unbrick/Repair) 1
  • Make certain re-partition is NOT ticked
  • Click the start button and wait couple of mins for the flashing procedure to start and finish
  • Once blinking is total, separate tool as well as boot normally.

Add Comment