Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy Note 5 can easily be done using this official firmware.
This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.
This firmware fixes software issues like:-
Un-brick bricked devices
Fix apps force closing
Device getting stuck during use, or lagging
Fix stuck on boot logo
Fix boot loop
Remove custom recovery (e.g, TWRP)
Remove root and restore default system files
Help upgrade/ update Android version to latest security patch
And just any software related faults
Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.
Firmware details/ Download
Model
SM-N920C
N920CXXU2BPB6_OLB2BPB6_v6.0.1
Download
N920CXXU2AOJ5_OJP2AOJ5_Arabic_v5.1.1
Download
N920CXXU1AOH2_OJV1AOH2_Arabic_v5.1.1
Download
Model
SM-N9200
N9200ZCU1AOH3_CHC1AOH3_v5.1.1
Download
Model
SM-N920A
Galaxy-Note-5-SM-N920A-Full-Factory-rom-6.0.1
Download
Model
SM-N920I
N920IDVU2AOJD_OLC2AOJD_v5.1.1
Download
Model
SM-N920P
N920PVPU1AOGD_SPT1AOGD_SPR_Sprint_USA_v5.1.1
Download
Model
SM-N920R4
N920R4TYU1AOGE_USC1AOGE_USC_U.S_Cellular_v5.1.1
Download
Model
SM-N920W8
N920W8VLU1AOI1_OYA1AOI1_XAC_Canada_v5.1.1
Download
How to flash Samsung Galaxy Note 5 via Odin
Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.
Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.
Download and install Samsung official USB driver on your computer. (Skip step if already installed)
Download and extract (unzip) the firmware file
Download Odin Tool
Extract the contents of Odin ZIP file
Run/Launch Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect device to Computer via USB cable and wait until you get a blue sign in Odin
Select/ add the four firmware files extracted in step one.
For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Make sure re-partition is NOT ticked
Click the start button and wait few minutes for the flashing process to begin and complete
Once flashing is complete, disconnect device and boot normally.
I am Owner of (https://www.softbarecip.com) Website. I Build this website for helping Peoples for Finding the Driver & Software they need to their Operating System.