Un-bricking, upgrading and/or fixing software faults on your Samsung Galaxy J7 can quickly be done using this official firmware.
This is a four file (AP, BL, CP and CSC) repair work firmware with which you can unbrick your smartphone and/or repair other software faults on the device.
This firmware repairs software issues like:–LRB-
- Un-brick bricked gadgets
- Fix apps require closing
- Device getting stuck throughout usage, or lagging
- Fix stuck on boot logo design
- Fix boot loop
- Remove custom-made healing (e.g, TWRP)
- Remove root and bring back default system files
- Help upgrade/ update Android variation to latest security patch
- And simply any software associated faults
Before downloading any firmware for your Samsung device, check and validate that the firmware is indicated for your exact gadget design. This is required to prevent downloading the incorrect file, causing your device to brick.
Firmware details/ Download
| Model | SM-J700 H |
| J700 HXXU2BPF2-Full-Factory-Rom-6.0.1 | Download |
| J700 HXXU1AOG3_OXY1AOFG_v5.1.1 | Download |
| Model | SM-J700 F |
| J700 FXXU1AOFJ_OJV1AOFJ-Arabic-v5.1.1 | Download |
| Model | SM-J700 M |
| J700 MUBU1AOG1_UUB1AOG1_v5.1.1 | Download |
How to flash Samsung Galaxy J7 by means of Odin
Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be eliminated when flashing achieves success.
Charge your phone to at least 50% prior to you proceed with the flashing guidelines listed below. Read and follow all actions carefully, especially if you are not very knowledgeable in flashing Samsung devices.
- Download and install Samsung main USB driver on your computer system. ( Skip action if already set up)
- Download and extract (unzip) the firmware file
- Download Odin Tool
- Extract the contents of Odin ZIP file
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
- Connect device to Computer by means of USB cable television and wait up until you get a blue check in Odin
- Select/ add the 4 firmware files extracted in step one.
- For instance, BL is the bootloader file- click BL in Odin and select that file. In the very same way, click AP, CP, and CSC choose the files appropriately. See below screenshot
- Make sure re-partition is NOT ticked
- Click the start button and wait couple of minutes for the flashing process to start and complete
- Once flashing is complete, disconnect device and boot usually.