Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy A9/Pro can easily be done using this official firmware.
This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.
This firmware fixes software issues like:-
Un-brick bricked devices
Fix apps force closing
Device getting stuck during use, or lagging
Fix stuck on boot logo
Fix boot loop
Remove custom recovery (e.g, TWRP)
Remove root and restore default system files
Help upgrade/ update Android version to latest security patch
And just any software related faults
Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.
Firmware details/ Download
Samsung Galaxy A9 firmware
Model
SM-A920F
G9600ZCU2ARC6_G9600CHC2ARC6_CHC_8.0
Download / Download
Model
SM-A9200
A9200ZCU1ARK9_A9200CHC1ARK9_CHC_8.0
Download / Download
Model
SM-A920N
A920NKSU1ASA1_A920NKOO1ASA_KOO_8.0
Download / Download
Model
SM-A9000
SM-A9000
Download
Samsung Galaxy A9 Pro firmware
Model
SM-A9100
A9100ZCU1API2
Download
Model
SM-A910F
A910FXXU1CRIA_A910FOLB1CRIA_XXV_8.0
Download / Download
A910FXXU1BRA2_A910FOLB1BRA2_XXV_7.0
Download / Download
How to flash Samsung Galaxy A9/Pro via Odin
Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.
Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.
Download and install Samsung official USB driver on your computer. (Skip step if already installed)
Download and extract (unzip) the firmware file
Download Odin Tool
Extract the contents of Odin ZIP file
Run/Launch Odin.exe
Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect device to Computer via USB cable and wait until you get a blue sign in Odin
Select/ add the four firmware files extracted in step one.
For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Make sure re-partition is NOT ticked
Click the start button and wait few minutes for the flashing process to begin and complete
Once flashing is complete, disconnect device and boot normally.