Samsung Galaxy A50 (SM-A505) Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or repairing software faults on your Samsung Galaxy A50 (SM-A505) can easily be done using this official firmware.

This is a four file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or fix other software faults on the device.

This firmware fixes software issues like:-

  • Un-brick bricked devices
  • Fix apps force closing
  • Device getting stuck during use, or lagging
  • Fix stuck on boot logo
  • Fix boot loop
  • Remove custom recovery (e.g, TWRP)
  • Remove root and restore default system files
  • Help upgrade/ update Android version to latest security patch
  • And just any software related faults

Before downloading any firmware for your Samsung device, check and confirm that the firmware is meant for your exact device model. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware details/ Download

Model SM-A505F
A505FDDU1ASB7_A505FODM1ASB7_INS_9.0 Download / Download

Model SM-A505FM
A505FMPUU1ASBD_A505FMSER1ASBD_SER_9.0 Download / Download

Model SM-A505FN
A505FNXXU1ASBG_A505FNOXM1ASBG_BTU_9.0 Download / Download

Model SM-A505G
A505GUBU1ASBD_A505GOWO1ASB9_COO_9.0 Download / Download

Model SM-A505GN
A505GNDXU1ASBA-20190306143140_BRI_9.0 Download / Download

Model SM-A505U
A505USQU1ASF2_A505UOYN1ASF2_SPR_9.0 Download / Download

Model SM-A505GT
A505GTUBU3ASF7_A505GTOWO3ASF7_ZTO_9.0 Download / Download
A505GTUBU1ASBD_A505GTOWO1ASB9_ZTO_9.0 Download / Download

How to flash Samsung Galaxy A50 (SM-A505) via Odin

Note: Backup all important data (messages, contacts, app data, settings, etc) as these might be erased once flashing is successful.

Charge your phone to at least 50% before you proceed with the flashing instructions below. Read and follow all steps carefully, especially if you are not very experienced in flashing Samsung devices.

  • Download and install Samsung official USB driver on your computer. (Skip step if already installed)
  • Download and extract (unzip) the firmware file
  • Download Odin Tool
  • Extract the contents of Odin ZIP file
  • Run/Launch Odin.exe
  • Reboot Phone in Download Mode (press and hold Home + Power + Volume Down buttons)
  • Connect device to Computer via USB cable and wait until you get a blue sign in Odin
  • Select/ add the four firmware files extracted in step one.
    • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC select the files accordingly. See below screenshot
Samsung Galaxy A50 (SM-A505) Firmware (Unbrick/Repair) 1
  • Make sure re-partition is NOT ticked
  • Click the start button and wait few minutes for the flashing process to begin and complete
  • Once flashing is complete, disconnect device and boot normally.

Add Comment