Un-bricking, upgrading and/or fixing software mistakes on your Samsung Galaxy A5 can conveniently be done utilizing this official firmware.
This is a four data (AP, BL, CP and CSC) repair work firmware with which you can unbrick your mobile phone and/or repair other software faults on the tool.
This firmware solutions software problems like:–LRB-
- Un-brick bricked tools
- Fix applications force closing
- Device obtaining stuck during use, or lagging
- Fix stuck on boot logo design
- Fix boot loop
- Remove personalized recuperation (e.g, TWRP)
- Remove root and also restore default system data
- Help upgrade/ update Android version to most recent safety and security spot
- And just any type of software relevant mistakes
Before downloading any type of firmware for your Samsung tool, check and verify that the firmware is suggested for your exact tool design. This is needed to prevent downloading and install the incorrect data, triggering your gadget to brick.
Firmware information/ Download
| Model | SM-A500 FU |
| A500 FUXXU1AOB4_OXA1AOB1_v4.4.4 | Download |
| Model | SM-A500 G |
| A500 GXAU1ANK2_ODD1ANK3_India_v4.4.4 | Download |
| Model | SM-A500 H |
| A500 HXXU1AOC1_OXY1AOB1_v4.4.4 | Download |
| Model | SM-A500 K |
| A500 KKTU1AOA1_KTC1AOA1 | Download |
| Model | SM-A500 XZ |
| A500 XZXXU1ANL1_PAP1ANL1_v4.4.4 | Download |
How to flash Samsung Galaxy A5 by means of Odin
Note: Backup very important data (messages, calls, app data, settings, etc) as these may be gotten rid of when flashing succeeds.
Charge your phone to a minimum of 50% before you proceed with the flashing directions below. Read as well as adhere to all actions meticulously, particularly if you are not really experienced in blinking Samsung gadgets.
- Download and also mount Samsung main USB driver on your computer. ( Skip action if already set up)
- Download and also remove (unzip) the firmware documents
- Download Odin Tool
- Extract the contents of Odin ZIP data
- Run/Launch Odin.exe
- Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
- Connect gadget to Computer by means of USB wire and also wait until you get a blue check in Odin
- Select/ include the 4 firmware data drawn out in step one.
- For circumstances, BL is the bootloader documents- click BL in Odin as well as pick that file. Similarly, click AP, CP, as well as CSC select the documents accordingly. See below screenshot
- Make sure re-partition is NOT ticked
- Click the start switch and also wait few mins for the blinking process to start and complete
- Once flashing is total, disconnect tool and boot typically.
