Samsung Galaxy A30 (SM-A305) Firmware (Unbrick/Repair)

Un-bricking, upgrading and/or fixing software faults on your Samsung Galaxy A30(SM-A305) can easily be done utilizing this main firmware.

This is a 4 file (AP, BL, CP and CSC) repair firmware with which you can unbrick your smartphone and/or repair other software faults on the device.

This firmware fixes software problems like:–LRB-

• Un-brick bricked gadgets
• Fix apps force closing
• Device getting stuck throughout use, or lagging
• Fix stuck on boot logo design
• Fix boot loop
• Remove customized recovery (e.g, TWRP)
• Remove root and restore default system files
• Help upgrade/ upgrade Android variation to latest security patch
• And simply any software related faults

Before downloading any firmware for your Samsung device, check and validate that the firmware is meant for your exact gadget design. This is necessary to avoid downloading the wrong file, causing your device to brick.

Firmware information/ Download

How to flash Samsung Galaxy A30(SM-A305) through Odin

Note: Backup all important information (messages, contacts, app data, settings, etc) as these may be eliminated as soon as flashing achieves success.

Charge your phone to at least 50% prior to you proceed with the flashing instructions listed below. Read and follow all steps carefully, especially if you are not extremely skilled in flashing Samsung gadgets.

• Download and install Samsung main USB driver on your computer system. ( Skip action if currently installed)
• Download and extract (unzip) the firmware file
• Download Odin Tool
• Extract the contents of Odin ZIP file
• Run/Launch Odin.exe
• Reboot Phone in Download Mode (press and hold Home Power Volume Down buttons)
• Connect gadget to Computer by means of USB cable television and wait up until you get a blue check in Odin
• Select/ include the four firmware files drawn out in action one.
  • For instance, BL is the bootloader file- click BL in Odin and select that file. In the same way, click AP, CP, and CSC choose the files appropriately. See below screenshot

• Make sure re-partition is NOT ticked
• Click the start button and wait few minutes for the flashing procedure to start and finish
• Once flashing is complete, disconnect device and boot typically.