This Motorola Moto G9 Play official firmware flash file (stock ROM) can help you easily un-brick or restore your device to its default or factory state. If you have previously rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing modified system files to replace with factory software.
If you have you have important data on the phone (like contacts, messages, app data, etc), please back them up because you could loose data after flashing.
Charge the phone to at least 50% so that the flashing process will not be interrupted by low battery. Interrupting the firmware installation means bricking your phone.
Download the firmware file from the link below and follow the recommended flashing instructions immediately after the download options. Please report any broken links discovered.
| Build | Firmware |
|---|---|
| XT2083-1_GUAMP_RETBR_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_RETLA_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_RETLA_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_AMXMX_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_ATTMX_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-3_GUAMP_RETEU_10_QPXS30.30-Q3-38-42-5 | Download |
| XT2083-6_GUAMP_RETEU_10_QPX30.30-Q3-38-61 | Download |
| XT2083-1_GUAMP_OPENMX_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-3_GUAMP_RETAPAC_AU_10_QPX30.30-Q3-38-59 | Download |
| XT2083-3_GUAMP_RETAPAC_JP_10_QPX30.30-Q3-38-62 | Download |
| XT2083-3_GUAMP_RETAPAC_TW_10_QPX30.30-Q3-38-42 | Download |
| XT2083-3_GUAMP_RETIN_10_QPX30.30-Q3-38-42 | Download |
| XT2083-4_GUAMP_RETAPAC_AE_10_QPX30.30-Q3-38-59 | Download |
| XT2083-4_GUAMP_RETAPAC_MY_10_QPXS30.30-Q3-38-59-2 | Download |
| XT2083-4_GUAMP_RETAPAC_SA_10_QPX30.30-Q3-38-59 | Download |
| XT2083-5_GUAMP_RETAPAC_AE_10_QPX30.30-Q3-38-59 | Download |
| XT2083-5_GUAMP_RETAPAC_TH_10_QPX30.30-Q3-38-52 | Download |
| XT2083-1_GUAMP_RETAR_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_RETBR_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-3_GUAMP_RETEU_10_QPXS30.30-Q3-38-42-5 | Download |
| XT2083-6_GUAMP_RETEU_10_QPX30.30-Q3-38-61 | Download |
| XT2083-3_GUAMP_RETIN_10_QPXS30.30-Q3-38-59-2 | Download |
| XT2083-1_GUAMP_TEFMX_10_QPXS30.30-Q3-38-42-4 | Download |
| XT2083-1_GUAMP_TIGCA_10_QPXS30.30-Q3-38-42-4 | Download |
Important! Always backup existing firmware before flashing any firmware.
How to flash Motorola Moto G9 Play firmware via Fastboot
To flash Motorola official factory firmware via fastboot- boot your phone into fastboot mode (press and hold volume down + power button simultaneously); connect USB cable to phone and then Computer. Now run the following commands via command window, ONE BY ONE. See how to install ADB and Fastboot drivers.
Note: Don’t copy/paste and run the entire fastboot commands. The file names here may differ from the firmware you have download and this will brick your phone. And if you brick your phone, that’s entire your fault. Also be sure that you’re flashing the correct firmware that matches your phone build number.
fastboot oem fb_mode_set fastboot flash partition gpt.bin fastboot flash bootloader bootloader.img fastboot flash logo logo.bin fastboot flash boot boot.img fastboot flash recovery recovery.img fastboot flash system system.img_sparsechunk.0 fastboot flash system system.img_sparsechunk.1 fastboot flash system system.img_sparsechunk.2 fastboot flash system system.img_sparsechunk.3 fastboot flash system system.img_sparsechunk.4 fastboot flash system system.img_sparsechunk.5 fastboot flash system system.img_sparsechunk.6 fastboot flash system system.img_sparsechunk.7 fastboot flash system system.img_sparsechunk.8 fastboot flash modem NON-HLOS.bin fastboot erase modemst1 fastboot erase modemst2 fastboot flash fsg fsg.mbn fastboot erase cache fastboot erase userdata fastboot erase customize fastboot erase clogo fastboot oem fb_mode_clear fastboot rebootIf you have any questions or other contribution please post in comments section for assistance.