Motorola Moto G5S (XT1793, XT1794, XT1792) official firmware flash file

This Motorola Moto G5S (XT1793, XT1794, XT1792) main firmware flash file (stock ROM) can help you quickly un-brick or restore your device to its default or factory state.

If you have formerly rooted or customized the system (or other) partition of the phone in any method, flashing this stock ROM will overwrite all existing modified system files to replace with factory software.

If you have you have essential data on the phone (like contacts, messages, app information, etc), please back them up because you could loose information after flashing.

Charge the phone to at least 50% so that the flashing procedure will not be interrupted by low battery. Interrupting the firmware setup indicates bricking your phone.

Download the firmware file from the link below and follow the suggested flashing instructions right away after the download alternatives. Please report any damaged links found.

Download Motorola Moto G5S firmware

Moto G5S XT1793, XT1794 firmware

File Name MONTANA_NPP26102-49 _ cid50 _ subsidy-DEFAULT_regulatory-DEFAULT_CFC.
Size 1.8 GB
Android variation 7.0
Firmware Download

Moto G5S XT1792 firmware

File Name MONTANA_NPP26102-49 _ cid50 _ subsidy-DEFAULT_regulatory-DEFAULT_CFC.
Size 1.8 GB
Android variation 7.0
Firmware Download

Important! Always backup existing firmware prior to flashing any firmware.

How to flash Moto G5S (XT1793, XT1794, XT1792) firmware via fastboot

To flash Motorola main factory firmware by means of fastboot- boot your phone into fastboot mode (press and hold volume down power button simultaneously); link USB cable television to phone and then Computer. Now run the following commands through command window, ONE BY ONE See how to install ADB and Fastboot drivers.

Note: Don’t copy/paste and run the whole fastboot commands. The file names here might differ from the firmware you have download and this will brick your phone. And if you brick your phone, that’s entire your fault. Be sure that you’re flashing the correct firmware that matches your phone develop number.

 fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo design logo.bin
fastboot flash boot boot.img
fastboot flash healing recovery.img
fastboot flash system system.img _ sparsechunk.0
fastboot flash system system.img _ sparsechunk.1
fastboot flash system system.img _ sparsechunk.2
fastboot flash system system.img _ sparsechunk.3
fastboot flash system system.img _ sparsechunk.4
fastboot flash system system.img _ sparsechunk.5
fastboot flash system system.img _ sparsechunk.6
fastboot flash system system.img _ sparsechunk.7
fastboot flash system system.img _ sparsechunk.8
fastboot flash modem NON-HLOS. bin
fastboot erase modemst1
fastboot eliminate modemst2
fastboot flash fsg fsg.mbn
fastboot erase cache
fastboot eliminate userdata
fastboot remove customize
fastboot remove clogo
fastboot oem fb_mode_clear
fastboot reboot

If you have any questions or other contribution please post in comments area for help.

Read Also :   Huawei Mate 8 (NXT-AL10) official firmware update