Motorola Moto C Plus official firmware flash file

This Motorola Moto C Plus main firmware flash file (stock ROM) can assist you quickly un-brick or restore your device to its default or factory state.

If you have formerly rooted or modified the system (or other) partition of the phone in any way, flashing this stock ROM will overwrite all existing customized system files to change with factory software.

If you have you have essential information on the phone (like contacts, messages, app information, etc), please back them up because you might loose data after flashing.

Charge the phone to at least 50% so that the flashing process will not be interrupted by low battery. Disrupting the firmware installation implies bricking your phone.

Download the firmware file from the link listed below and follow the advised flashing instructions immediately after the download options. Please report any broken links discovered.

Download Motorola Moto C Plus firmware

Moto C Plus XT1726 firmware

File Name PANELL _26 _ wp_NRD90 M.06031 _ subsidy_UNLOCKED_CFC. zip
Size 1.2 GB
Android version 7.0
Firmware Download

Moto C Plus XT1725 firmware

File Name PANELL _25 _ S_NRD90 M.05030 _ subsidy_UNLOCKED_CFC.
Size 1.2 GB
Android variation 7.0
Firmware Download

Moto C Plus XT1724 firmware

File Name PANELL _24 _ D_NRD90 M.04022 _ subsidy_UNLOCKED_CFC.
Size 1.2 GB
Android variation 7.0
Firmware Download/ Download

Moto C Plus XT1723 firmware

File Name EMEA_A158 L_K000 _ DS_V1.0 B31 _ DL_user( xt1723 _ DS_2gb _16 gb_S_At). zip
Size 1.3 GB
Android version 7.0
Firmware Download/ Download
File Name EMEA_A158 L_K100 _ DS_V1.0 B12 _ DL_user _( xt1723 _ DS_1gb _16 gb_S_A). zip
Size 1.3 GB
Android version 7.0
Firmware Download/ Download

Important! Always backup existing firmware before flashing any firmware.

Read Also :   HTC U12+ & HTC U12 life Manual / User Guide

How to flash Motorola Moto C Plus firmware via fastboot

To flash Motorola official factory firmware through fastboot- boot your phone into fastboot mode (press and hold volume down power button all at once); connect USB cable television to phone and then Computer. Now run the following commands via command window, ONE BY ONE See how to set up ADB and Fastboot drivers.

Note: Don’t copy/paste and run the entire fastboot commands. The file names here might vary from the firmware you have download and this will brick your phone. And if you brick your phone, that’s entire your fault. Also make certain that you’re flashing the proper firmware that matches your phone develop number.

 fastboot oem fb_mode_set
fastboot flash partition gpt.bin
fastboot flash bootloader bootloader.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash healing recovery.img
fastboot flash system system.img _ sparsechunk.0
fastboot flash system system.img _ sparsechunk.1
fastboot flash system system.img _ sparsechunk.2
fastboot flash system system.img _ sparsechunk.3
fastboot flash system system.img _ sparsechunk.4
fastboot flash system system.img _ sparsechunk.5
fastboot flash system system.img _ sparsechunk.6
fastboot flash system system.img _ sparsechunk.7
fastboot flash system system.img _ sparsechunk.8
fastboot flash modem NON-HLOS. bin
fastboot eliminate modemst1
fastboot remove modemst2
fastboot flash fsg fsg.mbn
fastboot eliminate cache
fastboot remove userdata
fastboot remove customize
fastboot eliminate clogo
fastboot oem fb_mode_clear
fastboot reboot

If you have any questions or other contribution please post in remarks section for assistance.