To blink your L8star Mini Phone and also recover to manufacturing facility default state, download and install the firmware (flash documents) in this article as well as comply with the recommended flashing directions (and device). It will un-brick and also fix mistakes in the tool, and if it was previously rooted, blinking this supply ROM will overwrite all changed system files to change with factory software.
Make certain to backup all important data on the phone, like get in touches with, messages, app data, etc. This is typically a required action prior to blinking, or resetting your smart device or tablet. After this process is total, all information on the tool is completely shed.
Again, make sure to charge the phone to a minimum of 30%. So the flashing procedure is not interrupted by low battery. Interrupting the firmware installment can result to a dead tool.
Download the firmware data from the web link listed below as well as comply with the suggested blinking instructions instantly after the download alternatives. Please report any busted links found.
Firmware checked out details:–LRB-
Phone located! [ 4 ] Sync ... Sync Ok, reviewed regs ... Inital regs reviewed done Boot Info: BB_CPU_ID: 6261 BB_CPU_HW: CB01 BB_CPU_SW: 0001 BB_CPU_SB: 8000 BB_CPU_NM: [MediaTek] MT6261 _ S000 0 BB_CPU_SN: 0244999 A990 E82 A4A42 CAEBE76 BB8FDD BROM Protocol Version: 05 Setting ... Setting done, result code 0x000 E BROM stage done Seek and prepare DownloadAgent matching HW Found! DA verify and also pick done Sending DA to target ... DA_INFO: 0xC0, Ver: 3.2, BBID: 0x8E SOC_VERIFY: 0xC1 BOOT_STYLE: SF_FLASH_BOOT NOR Flash IC initialized [0]: FLASH_VEN: 0x0113, [Winbond] SF_W25 Q32 JV [0]: FLASH_DIE: 00 EF 0070 0016 000 0 [0]: FLASH_LEN: 0x00400000 INT_RAM: 0x000 0D000 EXT_RAM: 0x00400000 File_Info: HEXING61 D_WIFI _11 C_PCB01 _ gprs_MT6261 _ S00 M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722 container FileVersion: M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722 Done! Expired: 00: 00: 24 Reconnect Power/Cable!
Build
HEXING61 D_WIFI _11 C_PCB01 _ gprs_MT6261 _ S00 M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722
Firmware
Download
Size
5 MEGABYTES
Phone located! [ 4 ] Sync ... Sync Ok, reviewed regs ... Inital regs reviewed done Boot Info: BB_CPU_ID: 6261 BB_CPU_HW: CB01 BB_CPU_SW: 0001 BB_CPU_SB: 8000 BB_CPU_NM: [MediaTek] MT6261 _ S000 0 BB_CPU_SN: 0244999 A990 E82 A4A42 CAEBE76 BB8FDD BROM Protocol Version: 05 Setting ... Setting done, result code 0x000 E BROM stage done Seek and prepare DownloadAgent matching HW Found! DA verify and also pick done Sending DA to target ... DA_INFO: 0xC0, Ver: 3.2, BBID: 0x8E SOC_VERIFY: 0xC1 BOOT_STYLE: SF_FLASH_BOOT NOR Flash IC initialized [0]: FLASH_VEN: 0x0113, [Winbond] SF_W25 Q32 JV [0]: FLASH_DIE: 00 EF 0070 0016 000 0 [0]: FLASH_LEN: 0x00400000 INT_RAM: 0x000 0D000 EXT_RAM: 0x00400000 File_Info: HEXING61 D_WIFI _11 C_PCB01 _ gprs_MT6261 _ S00 M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722 container FileVersion: M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722 Done! Expired: 00: 00: 24 Reconnect Power/Cable! | Build | HEXING61 D_WIFI _11 C_PCB01 _ gprs_MT6261 _ S00 M20 _ JHD_N2_ZX_SSD1306 Z_L24 EN _190722 |
| Firmware | Download |
| Size | 5 MEGABYTES |
Important! Always backup existing firmware prior to flashing any other firmware.
How to flash
After downloading the firmware from above link, extract the contents of the archive to a vacant folder on your computer system and flash using Miracle Box or any other tool that supports.BIN firmware.
If you have any kind of concerns or other payment please blog post in comments section for assistance.