Huawei Y336-U02 firmware (Y336-U02V100R001C328B118)

Stock firmware for Huawei Y336- U02 to be flashed via CM2, so as to recover your phone to its default manufacturing facility state. It will get rid of origin, virus, un-brick, and repair your gadget if it’s stuck on boot logo. If the phone lags, after blinking it ought to be better.

Additionally, you should take into consideration making a back-up of your existing firmware, and all other crucial information on your phone. Flashing will entirely remove your phone. Likewise, you need to just blink your gadget if you actually understand what you’re doing. To stay clear of screwing up your device, or turning it into a block.

It’s likewise crucial that your tool is charged up to a minimum of 30% so the procedure is not interrupted due to shutdown.

If there’s a damaged link, do not be reluctant to report via the comments section or utilize the contact type.

Firmware download web link

Build Firmware Size
Y336- U02 _ HWY336- U_4.4.2 _ Y336- U02 V100 R001 C328 B118 Download (Password: click) 557 MB
Y336- U02 V100 R001 C328 B118 Download (Password: click) 557 MB

Flashing guidelines

You need CM2 to flash this firmware. If you try out other device without success, well, you recognize …

Get a working USB cable television, after that adhere to the directions listed below-

  • Unpack downloaded firmware to an empty folder
  • Make sure you’ve set up the called for drivers on your COMPUTER.
  • Launch flashtool and also tons the firmware. You might need to wait a couple of seconds for it to process entirely
  • Now power off your device and also proceed with blinking steps

If you require any type of help on this device or blinking instructions, or you’ve obtained other contribution- do not wait to upload in the remarks section below. We do our best to respond and also answer your questions.

Add Comment