Huawei P9 Lite (VNS-L31C16B136) Firmware Update

You can download Huawei P9 Lite (VNS-L31C16B136) official stock firmware (OTA update) from the link in this post, and follow the provided flashing instructions to learn how to flash the stock ROM.

If you notice that any of the links provided below is broken or doesn’t work, please post in comments section so we fix and update it ASAP.

Table of Contents

Download Huawei P9 Lite VNS-L31C16B136 flash file

Size1.71 GB

How to flash P9 Lite (VNS-L31C16B136) firmware

In order to install the firmware on your P9 Lite (VNS-L31C16B136), you need:

  • SD card
  • Archive with firmware, downloaded from any link above (should contain dload folder with files- unlmt.cfg and or only
  • Fully charged battery

So, in order to flash the firmware you need to perform the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive contains only the file – create the dload folder and copy the file and an empty file with the name unlmt.cfg into it);
  2. Reboot tablet;
  3. After the reboot, a green Android with gears should appear and the process of flashing will begin, during which a reboot will occur;
  4. As soon as the process is over – remove the SD card and the device will reboot. Do not insert the SD card until the device reboots again, and then do not forget to remove the firmware files from it.
Read Also :   Wikoo K1000 firmware flash file