Huawei MediaPad T1 10 (T1-A21w) official firmware update

Download Huawei MediaPad T1 10 (T1-A21 w) main stock firmware (OTA upgrade) from the link in this post, and follow the provided flashing guidelines to discover how to flash the stock ROM.

If you see that any of the links offered listed below is broken or doesn’t work, please post in comments section so we repair and update it ASAP.

Download Huawei MediaPad T1 10 (T1-A21 w) flash file

File Name Huawei_MediaPad T1 10 _ Firmware_T1-A21 w_Android 4.4.2 _ EMUI 3.0 _ V100 R001 C232 B009 CUSTC100 D001 _ West
Size 1.28 GB
State Stock
Firmware Download

How to flash Huawei MediaPad T1 10 (T1-A21 w) firmware

In order to install the firmware on your MediaPad T1 10 (T1-A21 w), you require:

  • SD card
  • Archive with firmware, downloaded from any link above (might consist of dload folder with files- unlmt.cfg and or just
  • Fully charged battery

So, in order to flash the firmware you require to carry out the following steps:

  1. Copy the dload folder from the archive with the firmware to the root of the SD card (if the archive includes just the file– develop the dload folder and copy the file and an empty file with the name unlmt.cfg into it);-LRB-
  2. Reboot tablet;-LRB-
  3. After the reboot, a green Android with gears need to appear and the procedure of flashing will begin, throughout which a reboot will take place;-LRB-
  4. As soon as the process is over– remove the SD card and the device will reboot. Do not insert the SD card up until the device reboots once again, and after that do not forget to get rid of the firmware files from it.
Read Also :   Doogee Mix Official Firmware Flash File