Fero A4001 Plus firmware backup/dump (for CM2)

This Fero A4001 Plus firmware back-up for CM2 will certainly help you flash and recover your phone to its default manufacturing facility state. It will get rid of origin, virus, un-brick, and also repair your gadget if it’s stuck on boot logo design. If your phone lags, after blinking it must be much better.

Additionally, you need to consider making a backup of your existing firmware, and all other important data on your phone. Flashing will totally erase your phone. You should only blink your gadget if you really recognize what you’re doing. To prevent messing up your gadget, or transforming it right into a block.

It’s additionally vital that your tool is billed up to at least 30% so the procedure is not cut off due to shutdown.

If there’s a busted link, do not wait to report through the remarks section or make use of the contact form.

File name SP7731 CEB_A4001 _ Plus_6.0 _ FSA4001 plusv0009 _2017-10-19 _ Fero_A4001 _ Plus.rar
Size 775 MB
Firmware Download

Flashing guidelines

You require CM2SPD or any various other tool that sustains pac.sc files prior to you can blink this firmware.

Get a functioning USB cable, then adhere to the guidelines listed below-

  • Unpack downloaded and install firmware to an empty folder
  • Make certain you’ve installed the needed drivers on your PC.
  • Launch flashtool and lots the firmware. You may need to wait a couple of seconds for it to procedure entirely
  • Proceed with blinking using CM2

If you require any type of help on this tool or flashing guidelines, or you’ve got other payment- do not wait to upload in the comments section below. We do our ideal to respond and also address your questions.

Add Comment