Alldocube M8 (T806 K/T806 H) main stock firmware will certainly assist you flash and also restore your phone to its default manufacturing facility state. It will certainly remove origin, virus, un-brick, and repair your device if it’s stuck on boot logo. If your phone lags, after flashing it ought to be much better.
Additionally, you need to think about making a back-up of your present firmware, as well as all other essential data on your phone. Blinking will completely erase your phone. Also, you should only blink your tool if you actually know what you’re doing. To stay clear of messing up your tool, or transforming it right into a brick.
It’s likewise crucial that your gadget is billed up to at least 30% so the process is not interrupted due to closure.
If there’s a damaged link, do not think twice to report by means of the comments section or utilize the call form.
Firmware download link
| Version | Firmware | Size |
|---|---|---|
| M8( T806 K)- Android8.0-ALLDOCUBE-20200306 | Download | 1.09 GB |
| M8( T806 H)- Android8.0-191022 | Download | 1.07 GB |
Flashing guidelines
You need a device like SP Flashtool, Miracle Box, AfterSales SWD Tool, and so on, to blink this firmware. Get a functioning USB wire, after that adhere to the instructions below-
- Unpack downloaded and install firmware to an empty folder
- Make sure you’ve set up the required drivers on your PC.
- Launch flashtool and load the firmware. You could require to wait a couple of seconds for it to process completely
- Now power off your device and click on this link to read complete flashing instructions if using SP Flashtool.
If you need any help on this tool or blinking directions, or you’ve got various other contribution- do not hesitate to upload in the comments section below. We do our ideal to respond and answer your questions.
